WHITE, GAP FILLER

This acrylic multi purpose filler, with its high quality and long lasting features is perfect for many jobs such as filling cracks and holes. It can adhere to most substrates and it has an fungal agent to prevent mould in high humidity areas. It requires minimal tools, produces no fumes and is very easy to clean up so the job can be done quicker and more efficiently. This filler is the necessary tool for all professional painters and DIYers.

Properties

Mould Resistant – Paintable – Easy to Clean – 20y. Guarantee

Preparation

All the surfaces must be sound, clean, and free of dust, oil or contamination. All the release agents, existing waterproofing, dust, loose mortar, paints or other finishes must be removed. To clean the surface before caulking use mineral turpentine wet cloth and methylated sprits and leave to dry. For more stubborn finishes use sander.

Application

Cut off the top of the cartridge, position the threaded adaptor to the cartridge. Cut the threaded adaptor on an angle corresponding to the joint width. Place the cartridge into gun and inject the joint with the filler. Apply sufficient pressure to the filler to ensure good penetration and adhesion to the joint sides. The applied filler should be smoothed immediately with a wet cloth or spatula to clean off excess filler. Can be painted within 24 hrs. after application Staerk Fill All Gaps Multipurpose Construction is not suitable for areas with constant exposure to water and temperatures below 5C.

Cleaning

Clean while uncured with a wet rag. After hardening the excess filler can be removed with a spatula or sanded with fine grade sandpaper.