MS SEALANT AND ADHESIVE

STAERK MS is a sealant and adhesive suitable for many applications. Adheres to most common building substrates. Fully paintable. Available in cartridge in white, grey and black.

Properties

U/V Resistant – Paintable – Indoor / Outdoor – 20y. Guarantee

Suitale for :

• METAL, ALUMINIUM, STAINLESS STEEL
• WOOD, PVC, MOST PLASTICS
• BRICK, CONCRETE, MORTAR
• STONE, MARBLE , GRANITE
• PORCELAIN, CERAMIC, GLASS

Preparation

The base material need to be free of dust and grease or loose material. If needed clean up with a turpentine wet rag or cloth and let it dry. Complete adhesion test before use and make sure good compatibility and viscosity of the sealant with base materials.

Application

Cut off the top of the cartridge, position the threaded adaptor to the cartridge. Cut the threaded adaptor at an angle corresponding to the joint width. Place the cartridge into the gun and inject the joint with the sealant. Apply sufficient pressure to the sealant to ensure good penetration and adhesion to the joint sides. The applied sealant should be smoothed immediately with a wet spatula or jointer to clean off excess sealant. Staerk MS Sealant is not suitable for bonding polyethylene, polypropylene, Teflon, silicon or polystyrene based materials.

Cleaning

Clean while uncured with a turpentine cloth. After hardening removes the silicone sealant mechanically or with a silicone remover.